Checking Scanner Driver Operation - Fujitsu FI-6140 Getting Started Manual

3. In the dialog box below, click the [Next] button.
4. Install the application, following the on-screen
instructions.
HINT
For information about how to install Adobe Acrobat, refer to
"Read Me" that you can view when [Readme] is clicked in
the dialog box shown in Step 2.
For information about how to operate Adobe Acrobat, refer
to the Help topics in Adobe Acrobat.
ATTENTION
Notes for using Adobe Acrobat
When scanning a paper document and converting the
image to PDF using Adobe Acrobat, unexpected images
may be output when:
1. Setting "Edge Shadow Removal" in Acrobat, and setting
"Digital Endorser" or "Black Background" options in the
TWAIN driver at the same time. Letter strings embedded
in the image or the background may be missed.
Solution 1: Set "Edge Shadow Removal" to "OFF" or set
any option other than "Adaptive" for "Color/Grayscale"
and/or "Monochrome" under "Compression" by selecting
[File] [Create PDF] [From Scanner] [Optimization
Options] in Acrobat.
Solution 2: Adjust the scanning density in the TWAIN
driver.
2. Setting "Adaptive" for "Color/Grayscale" and/or
"Monochrome" under "Compression" in Acrobat and
scanning in a resolution lower than the resolution
recommended for Acrobat.
Solution: Set OPTION to something other than
"Adaptive" under "Compression."
3. Scanning a document longer than the double letter
(11x17) or A3 size, when setting "Overscan" in the
TWAIN driver, the scan may fail.
Solution: When scanning a double letter (11x17) or A3
size of document, do not set "Overscan" in TWAIN driver.
*As for detailed usage and information on Acrobat, refer to
"Create a PDF file from a scanned document" in Acrobat
Help.
ATTENTION
Support and User registration for Adobe products
For details, refer to the technical support information stored
in the [Customer Support] folder on Adobe Acrobat CD-
ROM. (Note that free person-to-person support is not
available for this is a bundled product.)
9
2.4 Checking Scanner Driver
Operation
This section explains how to check the operation of the
installed scanner driver by using ScandAll PRO.
Make sure that the scanner driver is installed properly,
following the procedure below.
■ Checking the Operation of the
Scanner Driver
1. Load the document on the scanner.
For information about how to load the document, refer
to section "2.2 Loading Documents on the ADF for
Scanning" in "fi-6140/fi-6240 Operator's Guide."
2. Launch ScandAll PRO.
From the [start] menu, select [All Programs]
[Fujitsu ScandAll PRO]
3. In ScandAll PRO, select [Tool] on the menu, and
then select [Preferences].
⇒
The [Setup] dialog box appears.
4. On the [Scan] tab, select a driver.
To check the operation of FUJITSU TWAIN 32, select
[TWAIN].
To check the operation of FUJITSU ISIS, select [ISIS].
5. Click the [OK] button to close the [Setup] dialog
box.
6. In ScandAll PRO, select [Scan] on the menu, and
then select [Select Scanner].
[Fujitsu ScandAll PRO].