Fusion MS-IP700i Manual page 55

700 series, true marine dvd / entertainment system for ipod
Hide thumbs Also See for MS-IP700i:
Table of Contents

Advertisement

Internet Protocol (IP) Setting (700 Series Only)
FUSION has provided additional Ethernet network configuration options. A
Static IP address function has been added allowing installers to configure the
700 Series either for dynamic (DHCP) or Static IP address allocation.
WARNING: IF THE 700 SERIES STEREO IS CURRENLTY CONNECTED TO
AN ETHERNET NETWORK APPLYING INCORRECT IP SETTINGS MAY CAUSE
THE STEREO TO BECOME DISCONNECTED FROM THE NETWORK.
To change the IP Setting:
1. Press the Menu key.
2. Turn and then press the Encoder to select Settings > IP Address.
3. Press and turn the Rotary Encoder to select one of the following settings.
Static IP/DHCP
For Ethernet networks with a DHCP router installed select DHCP (default
setting). This function allows the network router to allocate a dynamic IP
address to the FUSION Stereo.
For installations requiring a Static IP address, select Static IP. A Static IP
screen will be displayed with the following fields;
Static IP Address
IP Address
000.000.000.000
1. Use the Forward/Rewind keys to select the IP field.
2. Turn the Encoder to display the required value.
3. Repeat Steps 1 and 2 until you have worked through all the fields you wish
to change.
4. Press and hold down the Encoder to save the changes and exit. or press
the Menu key to exit without saving the changes.
Factory Reset
The factory reset function will return all settings in the 700 Series to the
factory default value.
Warning: All AM, FM and VHF station presents are erased. Tuner and VHF
tuner regions are reset to USA. All zones are enabled and zone settings, tone,
subwoofer filter settings, source settings and device name are returned to
default values.
To reset your 700 Series to factory default values:
1. Press the Menu Key.
2. Turn and press the Encoder to select Settings > Update.
3. Turn and press the Encoder to select Factory reset. All settings will be
restored to the factory default. At the completion of the reset process the
stereo will automatically power down and restart.
Mask
000.000.000.000
Default GW (Gateway)
000.000.000.000
54

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms-av700i

Table of Contents