Fusion MS-IP700i Manual page 42

2. Insert your iPod in its sleeve (see iPod compatibility sheet supplied separately).
Make sure that the device is firmly pushed onto the connector socket.
3. Close the control panel door firmly.
4. Select the audio source, as required.
MS-AV700i and MS-IP700i Models
The 700 Series stereos provide an external USB connector (rear cable
assembly) for connection to external iPods, iPhones, MTP, USB storage
devices or FUSION MS-UNIDOCK dock.
To connect your iPod, you will need:
• Marine UNI-Dock (MS-UNIDOCK), or
• Apple Sync Cable for Apple devices
or the Micro-USB cable for your MTP device.
To connect your USB flash drive, you will need:
• Marine UNI-Dock (MS-UNIDOCK), or
• Connect your USB flash drive directly to the external USB cable.
Note: If you select iPod, MTP Devices or USB input without first connecting
the device, the message "Not connected" is displayed on the screen.
41