Fusion MS-IP700i Manual page 38

Important: If a Zone is disabled, you cannot change any of the following settings
for that Zone.
Disable Internal Amplifiers
Disable the internal amplifiers for Zones 1 and 2. For example, if external
amplifiers are used for Zones 1 and 2 the internal amplifiers can be disabled
to reduce power consumption.
To enable or disable the internal amplifiers for Zones 1 and 2:
1. Press the Menu Key.
2. Turn and press the Encoder to select Settings > Zone.
3. Select the Internal amplifier on menu item.
4. Press the Encoder to disable ( ) or enable ( ) the amplifiers
5. Press any key to exit
Volume control
Zones 3 and 4 can have volume control disabled. You should disable volume
control for a Zone that has its volume controlled from another amplifier or
Head unit. If volume control is:
• Enabled: turning the Encoder will change line level output for the
selected Zone only.
• Disabled: turning the Encoder will not change line level output for the
selected Zone.
To enable or disable volume control:
a. Select the Volume Control menu item.
b. Press the Encoder to enable ( ) or disable ( ) volume control.
c. Press any key to exit
Link to zone 1
Zones 1 and 2 can be linked so that any volume or sub-woofer level changes
are applied to both Zones. A small "+" sign is displayed on screen between
Zones 1 and 2 when this feature is enabled.
To link Zone 2 level to Zone 1 level:
a. Select the Link to zone 1 menu item.
b. Press the Encoder to link the two Zones ( ) or unlink ( ) the Zones.
c. Press any key to exit
37