Fusion MS-IP700i Manual page 54

To enable or disable the AM of VHF tuner sources:
1. Press the Menu key.
2. Turn and then press the Encoder to select the Settings > Sources.
3. If required, press the Encoder to enable the AM source (
the AM source (
4. If required, turn the Encoder to select VHF then, press the Encoder to
enable the VHF source (
5. Press any key to exit.
Set Aux name
Select `Set Aux name' to give the AUX input a name that is more
representative of the device connected to the AUX input. Select a name from
the available list. The name is displayed on the AUX Source screen along with
a matching graphic.
Accessory (Shared BT-200 Bluetooth & SiriusXM Source)
If you have installed the MS-BT200 Bluetooth module or SiriusXM Tuner (USA
Only) you will need to enable the source. This operation will be determined by
the Tuner region you have selected.
Tuner Region - USA
When USA Tuner region is selected, press the menu button and select
Settings>Sources>Accessory then select the source to enable SiriusXM or
Bluetooth.
Tuner Region - Australasia-Europe-Japan
In these Tuner regions once the MS-BT200 is installed and connected the
source will be available.
Set device name
Select `Set Device Name' to give the Stereo a network name of your choice.
The name is visible to other devices (Marine Wired Remotes MS-NRX200i)
connected to the same FUSION network. Rotate the rotary encoder to
change the character. Press the rotary encoder to select. Press the `Previous'
button to delete characters. · To save changes press the `Play' key. · To exit
without saving any changes: press the Menu key.
About
This option displays the Stereo software version, remote control version and
FUSION-Link software versions.
53
).
) or disable the VHF source (
) or disable
).