Subscribe to Our Youtube Channel
Related Manuals for Fusion 700 Series
Summary of Contents for Fusion 700 Series
- Page 1 700 Series Manual MARINE ENTERTAINMENT SYSTEM MS-IP700i True Marine Entertainment System for iPod MS-AV700i True Marine DVD Entertainment System...
- Page 2 As with all products exposed to the harsh marine environment, a little care will help preserve the finish. FUSION recommends that you clean any salt water and/ or salt residue from the stereo with a damp cloth soaked in fresh water.
- Page 3 All FUSION True Marine Products are backed by a 3 Year Limited Consumer Warranty and by registering your product you can be assured that if the unexpected occurs we’ll have your details and be ready to help.
-
Page 4: Table Of Contents
FUSION-Link......... - Page 5 ........... .26 .
-
Page 6: Control Panel Layout
USER INTERFACE AND CONTROLS CONTROL PANEL LAYOUT BUTTON DESCRIPTION PRIMARY SOURCE MS-AV700i Menu Tuner Auxiliary iPod source Rewind Play/Pause Forward Power Mute Clock Brightness... - Page 7 ROTARY ENCODER AND MENU KEY Although the controls of the 700 Series are designed to be intuitive to use, we Menu key before using the unit. ROTARY ENCODER OPERATION Series: MENU KEY OPERATION You can use the Menu key to open or to exit from menus: Press the Menu key to open a menu.
- Page 8 USING THE ROTARY ENCODER AND MENU KEY and open control screens. Adjusting levels For example, to adjust the volume level: Turn Encoder to Turn Encoder to Menu exit. See “Menu open the Volume adjust the level. Press Key Operation” on page screen Encoder to move highlight.
-
Page 9: Powering The Unit On Or Off
GETTING STARTED POWERING THE UNIT ON OR OFF When you power on the 700 Series it will automatically start playing music from the most recently selected input source. To power the unit on or off. up, a splash screen is displayed for several seconds, followed by the current input source. -
Page 10: Adjusting Volume Level
ADJUSTING VOLUME LEVEL The 700 Series allows you to control speaker output volume level in up to four If you wish, you can customize the settings for each Zone by defining a volume... -
Page 11: Muting Output
To adjust the volume level: volume level. highlight available Zones in the following order: Zone 1 Zone 2 Zone 3 Zone 4 All Zones current volume level and exit. MUTING OUTPUT To mute and unmute the volume: over the top of the current input source screen. Mute at the previously set level. -
Page 12: Adjusting Sub Level And Tone
ADJUSTING SUBWOOFER LEVEL AND TONE Use the Sub level and Tone screens to set the sub-woofer levels and tone. Sub-woofer level can be adjusted for each Zone individually, but tone adjustments affect all Zones. Menu key Encoder To set sub-woofer levels or tone: screen is displayed. -
Page 13: Displaying The Clock
When screen is displayed again. 6. Press any key to exit DISPLAYING THE CLOCK Use the Clock key to display the current time. If the time is incorrect, see “Clock Note: The current time is also displayed in the title bar of each input source screen. -
Page 14: Setting And Clearing The Alarm
Use alarm mode to turn on the 700 Series at a pre-defined time. When the alarm is activated, your 700 Series will play the last selected input source at the volume level in use when the unit was turned off. -
Page 15: Adjusting Screen Brightness
ADJUSTING SCREEN BRIGHTNESS Note: LCD and button backlight brightness can be linked to the ambient lighting level. For further details, see “Installing the 700 Series” on page 34. Brightness To adjust the brightness of the display screen: 1. Press the Brightness key. The Brightness screen is displayed. -
Page 16: Listening To The Tuner
TUNER LISTENING TO THE TUNER To select one of the available tuner bands: AM, FM, VHF or SiriusXM (USA only) requires optional SiriusXM Con- nect Vehicle Tuner. The applicable input source screen is displayed for each band. Tuner TUNER SOURCE SCREENS AM/FM/VHF An example of a typical tuner input source screen is shown in Figure 2 below. -
Page 17: Siriusxm
An example of the SiriusXM input source screen is shown in Figure 3 below. Figure 3 – Example SiriusXM input source screen TUNING METHODS You can use three methods to tune the 700 Series: manual, automatic and preset. Encoder Menu key... - Page 18 Tuning Method Applies to… When tuning with this method… Manual All bands Manual SiriusXM all channels one at a time. Category SiriusXM step through the channels in the selected category. the Category menu item. For further details see Auto AM/FM searching for available stations.
- Page 19 ADDING AND REMOVING PRESETS SiriusXM channels as presets for easy recall. Note: Up to 15 presets can be stored for each radio band. Encoder Menu key Play / Rewind Fast Tuner Pause Forward To add a new preset: Do one of the following. briefly.
- Page 20 FLASH drive: ANDROID (MTP) SUPPORT: MTP is a standard developed for connecting media (music) devices over USB. It has been adopted on a number of platforms including Android. FUSION currently supports a range of smartphones utilising MTP. Refer to www.fusionelectronics.com for the latest list of support devices.
-
Page 21: Ipod, Mtp, Bluetooth And Usb Source Screens
IPOD, MTP, BLUETOOTH AND USB SOURCE SCREENS Note: The availability of song information such as song title, artist name, track duration and album cover artwork is dependent on the capability of your icons are not supported over Bluetooth. CONTROLLING iPod PLAYBACK Selecting tracks from a playlist There can be thousands of tracks on an iPod, so you need to select the tracks you wish to play from one of the groupings available (such as Playlists, Artists,... -
Page 22: Controlling Bluetooth And Mtp Playback
Music Folder Structure FUSION recommends that folders contain no more than 300 files each. Exceeding this limitation may cause the phone to become unresponsive and the FUSION Stereo to reset the USB link to the phone. Music files must be located in a folder using one of the following names. The folder must be located in the root directory of your device. - Page 23 Songs stored in MP3 and M4A format (see note below) can be played on the FUSION Stereo. The FUSION Stereo will display your music collection in groupings of Songs, Albums and Artists allowing you to browse in these categories. In addition to the above groupings your music collection can be browsed according to the folder structure on your device.
-
Page 24: Changing Ipod Settings
Browsing Music Collections Over Bluetooth Not Supported Browsing music collections from the FUSION Stereo is not supported over Bluetooth. Initial song and Playlist selection must be done on the media device. not supported CHANGING iPod SETTINGS Additional iPod control features are available through the iPod settings menu. -
Page 25: Changing Mtp Settings
Note: To prevent interruption to audio streaming over Bluetooth it is recommended that the Discoverable feature is turned off after pairing your device to the FUSION Stereo. Select this option to display the current list of paired devices. Select the device to be removed by rotating and pressing the rotary encoder. -
Page 26: Auxiliary Source Screen
flybridge or nav station of the vessel, providing integrated entertainment control and a less cluttered console. You can control one or more FUSION-Link capable stereo units from a single location on the boat with the touch of a button. FUSION-Link operates over Link Zones or manage the entire audio system from the steering station on the boat. - Page 27 TOTAL AUDIO CONTROL VIA NMEA 2000 within vessels. It has become the standard for sending navigation and engine management data within vessels. FUSION introduces an industry-first product Visit www.fusionelectronics.com FUSION MS-NRX200I REMOTE CONTROL (SOLD SEPARATELY) remote controls installed in the audio Zones throughout the vessel. The remote Control has a full-featured user interface.
- Page 28 INFRARED (IR) REMOTE MS-AV700i model only DVD source selected. The following keys work the same way as the matching Head unit keys in all sources. Power On / Off Mute all sound Play / Pause Display clock Skip back Skip forward The following keys work the same way in all sources.
- Page 29 The following keys work for the SiriusXM source Skip channels Forward /Back Press to select Manual or Preset tuning methods. Press to display the SiriusXM menu that provides access to control options. Press Menu key to exit current menu screen. to choose the highlighted menu item.
- Page 30 1 x MS-AV700i or MS-IP700i Stereo 4 x Mounting Screws 1 x Protective Dust Cover 2 x Mounting Brackets 1 x FUSION Drop Cable CAB000851. 1 x Mounting Gasket See note below. 1 x User Manual 1 x Power Cable Loom...
- Page 31 Figure 8 – Dimensions - side view Figure 9 – Dimensions - front view...
- Page 32 CONNECTIONS DESCRIPTION COLOUR Battery +12VDC Yellow Negative Ground Black Dim input [12VDC active] Orange Telemute input [GND active] Brown Note: All +12V wiring MUST be fused at the power source end of your cable, with MS-700i head unit wiring loom. When connecting the Dim input ensure the wire gauge used is suitable for the fuse supplying the circuit being connected to.
- Page 33 ETHERNET CONNECTION TO PARTNERED MFD Multi Function Displays. SiriusXM SATELLITE RADIO ZONE CONNECTIONS Note channel can be connected in parallel to achieve 2 Ohm configuration...
- Page 34 REMOTE CONTROL (NMEA2000) USB CONNECTION USB CONNECTION (iPod, iPhone, MTP device, USB (MS-AV700 ONLY) storage device or FUSION dock) (USB storage device or FUSION dock) SiriusXM Tuner SiriusXM ETHERNET CONNECTION MS-BT200 Bluetooth module ANTENNA L (white) ZONE 1 R (RED)
-
Page 35: Installation
INSTALLA TION ELECTRICAL WIRING Caution: The MS-IP700i and MS-AV700i are designed for vessels with a 12C DC Negative ground electrical system. - Page 36 700 Series CONNECTION EXAMPLE OPTIONAL SiriusXM TUNER OR BLUETOOTH MODULE MS-UNIDOCK EXTERNAL DOCK MS-IP700i or MS-AV700i...
-
Page 37: Zones
SETTING UP THE 700 Series ZONES You can pre-set the balance, volume limit, sub-woofer level and name for each For further details, see instructions below. Rotary Menu key Encoder Selecting and setting up a zone To select a Zone and modify its settings: 1. - Page 38 Important: If a Zone is disabled, you cannot change any of the following settings for that Zone. Disable Internal Amplifiers Disable the internal amplifiers for Zones 1 and 2. For example, if external amplifiers are used for Zones 1 and 2 the internal amplifiers can be disabled to reduce power consumption.
- Page 39 Balance To specify the balance for the selected Zone: a. Select the Balance menu item. c. Press any key to exit Volume limit This feature is useful to limit the volume level to prevent excessive noise levels in specific Zones. To specify the volume limit for the selected Zone: a.
-
Page 40: Preparing For Ipod, Mtp Device Or Usb Connection
Check and obey all marine laws in association with use. ANDROID (MTP) SUPPORT: MTP is a standard developed for connecting media (music) devices over USB. It has been adopted on a number of platforms including Android. FUSION currently supports a range of smartphones utilising MTP. -
Page 41: Ms-Ip700I Model
USB connector. Note: The internal dock does not support MTP devices and Apple devices featuring an Apple Lightning connector. An external FUSION MS-UNIDOCK is recommended for this purpose. The MS-IP700i Stereo does NOT support multiple iPod or iPhone devices connected simultaneously. - Page 42 Make sure that the device is firmly pushed onto the connector socket. 3. Close the control panel door firmly. MS-AV700i and MS-IP700i Models The 700 Series stereos provide an external USB connector (rear cable To connect your iPod, you will need: or the Micro-USB cable for your MTP device.
- Page 43 To connect your iPod, MTP device or USB FLASH drive to the 700 Series via a UNI-Dock: IMPORTANT NOTE: ONLY PHONES AND DEVICES THAT FEATURE BOTTOM MOUNTED CONNECTORS ARE SUPPORTED. DEVICES WITH SIDE CONNECTORS ARE NOT SUPPORTED. Portable media device dock 1.
-
Page 44: Bluetooth Media Device
For installations where the Satellite MS-BT100 audio onlyBluetooth module is recommended. from the FUSION Stereo. Song information such as song title, artist name and duration are displayed, depending on the capability of your phone and music application. phone is not supported from the FUSION stereo. -
Page 45: Clock Setting
Note: When using the headphone output of a portable device, it may be necessary to adjust the device’s own volume control for best audio quality. CLOCK SETTING The 700 Series unit has a built-in clock that can display the time in 12-hour or 24-hour mode. To set the clock: 1. - Page 46 hour AM/PM setting. 7. If you want to use the 24 hour clock display (13:09 rather than 1:09 pm, 24 hour Steps 2–3 below. To select 12 or 24 hour clock display mode: 1. Press the Menu key. 4. Press any key to exit SiriusXM SATELLITE RADIO including the most commercial-free music, plus the best sports, news, The SiriusXM tuner is an optional extra that must be purchased separately.
- Page 47 Power on your system and make sure that you are receiving good signal, you are able to hear audio on using one of the two methods below: Online: Go to www.siriusxm.com/activatenow Phone: Call 1-866-635-2349 SiriusXM menu options Press the Menu key to display the SiriusXM menu that provides access to more about using the Channels, Category and Parental options.
- Page 48 Padlock icon mature content. If you select this channel you will be asked to unlock parent mode, if it is not already unlocked. Category You can use the Category menu item to control which categories of To select a Category: 1.
- Page 49 All channels. The SiriusXM Source Screen is displayed with the Tuning mode indicated set to ‘Manual’. 4. Press the Menu key to exit the current menu or press and hold the Menu key to close the menu completely. Parental mode Parental mode provides a way of preventing access channels marked by SiriusXM as enter Parental mode.
- Page 50 have entered all four digits correctly, you will be prompted to enter the new access code. highlighted digit, have entered all four digits correctly, you will be prompted to enter the new access code for a second time. Channel Locking / unlocking channels cannot be seen in the Sirius Source Screen or when changing channels with the Forward and Backward keys.
-
Page 51: Advanced Settings
To lock or unlock a channel: 1. Press the Menu key. Parental > Unlock. 3. Select the Lock/Unlock menu item. ADVANCED SETTINGS The settings described in this section are usually set up when the unit is installed and not changed again. Menu key Rotary Encoder... - Page 52 Power save If you are operating the 700 Series on battery power, you can turn on the power save option to reduce drain on the battery. The LCD screen shuts down To enable or disable power saving mode: 1.
- Page 53 Tel mute Use this option to control which action is taken when the 700 Series is connected to a cellphone hands-free kit. To change the Tel mute setting: 1. Press the Menu key. Settings > Tel mute. Mute. Mutes the audio output from the 700 Series when a call is received on your cellphone.
- Page 54 Press the rotary encoder to select. Press the `Previous’ button to delete characters. · To save changes press the `Play’ key. · To exit without saving any changes: press the Menu key. About This option displays the Stereo software version, remote control version and FUSION-Link software versions.
- Page 55 Menu key to exit without saving the changes. Factory Reset The factory reset function will return all settings in the 700 Series to the factory default value. Warning: tuner regions are reset to USA. All zones are enabled and zone settings, tone, subwoofer filter settings, source settings and device name are returned to...
-
Page 56: Troubleshooting
As with all products exposed to the harsh marine environment, a little What is the best care will help to preserve the finish. FUSION recommends that you clean way to prevent corrosion on any salt water and/or salt residue from the front panel with a damp cloth soaked in fresh water. - Page 57 Bluetooth module. To prevent interruption to audio streaming over Bluetooth it is short breaks. recommended that the Discoverable feature is turned off after pairing your device to the FUSION Stereo.
- Page 58 If you are still unable to connect once you have confirmed that you have the latest software or you have updated your iPod/iPhone: If you are still unable to connect: tech email on the FUSION website.
- Page 59 IP address on the 700 Series and follow the instructions in the stereo available” below tech support item The first thing to check is that the 700 Series is displaying a valid IP address on the about screen. Select the settings menu then about to My FUSION-Link Wireless remote confirm.
-
Page 60: Specifications
SPECIFICA TIONS FCC compliance statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: that may cause undesired operation. General specifications Operating voltage ........10.2–16 VDC negative ground Fuse rating .............15 amp DVD player Laser power ..........Class I Power output... -
Page 61: Licensing
Japan VHF tuning range All regions The following additional channels are tuner region (Please refer to LICENSING Apple, the Apple Sirius, XM and all related logo, iPod and iPhone marks and logos are are trademarks of trademarks of SiriusXM Trademark of the National Marine Apple Computer, Inc., reserved. -
Page 62: Index
INDEX 700 Series control panel, layout................................5 ethernet support ................................26 installing ....................................29 setting up ..................................... 36 specifications ..................................59 troubleshooting ................................55 disable internal amplifiers............................37 factory reset..................................55 alarm, setting and clearing ............................13 album artwork setting on iPod, changing ......................20 operation .................................... - Page 63 700 Series ........................... 26 FAST menu search feature on iPod ........................23 FUSION-Link control system ............................ 25 gain value, adjusting for auxiliary input ......................44 ............................27 installing the 700 Series .............................. 34 iPod compatibility................................... 1 controlling playback ..............................20 FAST menu search feature ...........................
- Page 64 ................................... 24 described ....................................9 iPod ......................................20 SiriusXM ....................................16 tuner source screens ..............................15 specifications for 700 Series ........................... 59 ................................ 18 sub filter, setting ................................50 subtitles setting on iPod, changing ........................24 sub-woofer level adjusting ....................................
- Page 65 USB flash drive controlling playback ..............................22 format information ................................. 1 listening to your music .............................. 19 preparing for input ..............................39 selecting audio tracks ..............................21 settings, changing ................................ 24 background noise, minimizing ..........................18 region, setting ................................. 52 scan mode, turning on ...............................
- Page 66 NOTES ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
- Page 67 prices are subject to change without notice. Product availability may vary between sales regions. “Made for iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
- Page 68 Specifications and design are subject to change without notice P/N MAN000001G...
Need help?
Do you have a question about the 700 Series and is the answer not in the manual?
Questions and answers