Advanced Settings - Fusion MS-IP700i Manual

To lock or unlock a channel:
1. Press the Menu key.
2. (if required) turn and then press the Encoder to select Parental > Unlock.
Enter your access code.
3. Select the Lock/Unlock menu item.
4. Turn the Encoder to highlight a channel then press the Encoder to
lock ( ) or unlock ( ) the channel, as required.
5. Press the Menu key (or leave to time out) to exit.

ADVANCED SETTINGS

The settings described in this section are usually set up when the unit is
installed and not changed again.
Menu key Rotary
Encoder
Sub filter
Use the sub filter setting to control the sub-woofer cutoff frequency. Audio
signals above the selected frequency will not be passed on to the sub-woofer.
The sub filter settings apply to all sub-woofer outputs.
50