How To Set Up [Target Url] When There Is No Dns Server - Oki MC860 Easy Setup Manual

6-2 How to set up [Target URL] when there is no DNS server

If there is no DNS server in the network, a computer can not be specified by the computer name.
In this case, the IP address of a computer is used for the setup.
Check the IP address of a computer.
1) Select [Start]- [ Control Panel]- [Network].
2) Double-click [Local Area Connection] to click
[Properties].
3) Select [Internet Protocols (TCP/IP)] and click
[Properties].
4) Enter the value of the IP address in "C-1".
If the IP address is not displayed on the
window, proceed to 6).
5) Click [Cancel] to close the window.
Proceed to
6) Click [Cancel] to close the window.
7) Select [Start]- [All Programs]- [Accessories]-
[Command Prompt].
8) Enter " ipconfig " to press the Enter key.
9) Enter the Value in IP address in "C-1".
10) Enter " exit " to exist the command prompt.
Set up the profile in MC860.
Set up with the procedure of "3-3 Setup for
Scan To CIFS in MC860" (page 22).
In this case, the value to be entered in the
Step ❽ on page 22 is as follows.
Enter in
"C-1".
Enter in
"C-1".

\\ + 192.168.0.3 + \ + SalesDev