Cleaning The Remote Controller - Daikin J-Series Engineeiring Data

EDUS041016
Cleaning

Cleaning the remote controller

 Wipe it clean with soft, dry cloth.
Do not use any water hotter than 40˚C (104˚F), or v olatile liquids such as benzine, gasoline and
thinner, polishing powder, or anything hard such as a scrub brush.
When the unit is not used for a long time
Room Air Conditioners J-Series
3
1
2
3
2 1
3P202922-2B
On a sunny day, keep the system running for
half a day in the FAN mode to dry it up inside.
FAN mode
Press to select the cooling
mode.
Press to adjust the set
temperature to 32˚C (90˚F).
Press .
 T he airflow rate remains the same, and is not
adjustable.
 R un the system when the room temperature
is below 28˚C (82˚F).
Finally turn off the circuit breaker dedicated for
the room air conditioner.
Clean the air filter and place it back into
position.
Optional Accessories
15
91