File Programming - QUORION CR 20 User Manual

9.3 File Programming

Start programming either by entering the file number directly on the "TYPE" key or by pressing the
"TYPE" key without entry and selecting the file from the programming window. At the end of each
line the file number is shown in brackets for reference.
Please note that files, which are not activated in the configuration, will not be shown. The following
files are available:
1 Parameters
2 Options
3 Time Zones
4 Day of Week Zones
5 Day of Month Zones
6 Date Zones
7 Receipt Header
8 Receipt Trailer
9 Slip Header
10 Slip Trailer
11 General Texts
12 Error Messages
13 General Messages
14 Day Descriptors
15 Month Descriptors
16 Counters
17 Total Sales
18 Groups
19 Departments
20 PLU
21 Tax
22 Clerks
23 Salespersons
24 Tenders
25 Drawers
26 PO/RA
27 Discounts
28 Corrections
29 Foreign Currencies
When the file has been selected, the first record will automatically be displayed. You can jump to
another record by entering the record number on the "Multiplication" key. Pressing the "X" key
without entry will select the next record.
The data field to be programmed can be selected by the cursor keys "PAGE UP", "CURSOR UP",
"PAGE DOWN", "CURSOR DOWN". When the field is selected just input the new data and confirm
with "ENTER". When a field was modified, the new programming is automatically printed.
If you want to continue programming files, you may repeat the same steps. To finish the
programming mode press the key "TYPE" without entry.
30 User Reports
31
32
33
34
36
38
39 Keyboard 1
40
41
42
43
44 Special Itemizers
45
46
47
48
49
97
98 Password
99
200
201
202
205
206
210
305 Print program version
306 Init printer logo
32