Programming Network Features; Activating The Network - QUORION CR 1000 User Manual

This command will print and display the number of articles in the BASE and
UPDATE file.
255 – CLEAR COMPLETE PLU FILE
This command will clear the complete PLU file. Note that PLU sales and
inventory information is also cleared.
The command can be issued in programming mode on the TYPE key and in
MANAGER mode on the SUBTOTAL key. Note that COMMAND 255 to clear to complete
PLU file is only available in PROGRAM MODE.
PLU'S WITH SCANCODES ON KEYBOARD
When using scan codes it is also possible to put a PLU directly on the keyboard of
the register. Because the key code as programmed in the key table contains the record
number in the PLU Index file and not the scan code there are a few points you must keep
in mind.
1 – PLU File Maintenance
Maintenance of the PLU file like creating and/or deleting PLU's should be
done either on the computer OR on the register but NOT ON BOTH because this
will result in different Index files for the computer and register.
2 – Programming PLU keys in WQPROG
When programming PLU keys in WQPROG you must enter the scan code in
the code field.
3 – Programming PLU keys on the Register
When programming PLU keys on the register you must enter the scan code
in the key-programming mode. The register will automatically insert the correct
index record number in the key table. The register will recognize the entry as a scan
code when MORE then 5 digits are entered. Normal key codes have a value of
maximal 5 digits. This means that when you want the program a PLU with scan
code "123" you MUST enter "000123". Suppose this PLU is located at record
number 5 the register will put 10005 as key code which is also shown on the
display. When you enter "123" the register will program key code "123".
USING PLU'S WITH SCANCODES IN COMBINATION WITH BALANCES
On the Balance the Index Number of the PLU is stored so at the moment it is NOT
ALLOWED to create or delete PLU when there are still balances open because the
sequence of the index file will be changed which will result in wrong PLU on invoices.

5.5 Programming Network Features

5.5.1 Activating the Network

The network is activated by programming the REGISTER# in PARAMETER 53 and the
NETWORK PORT in PARAMETER 89. There are two types of network possible:
RS-232 NETWORK
28