Sound And Lamp Indications - Husqvarna Auto Mower Operator's Manual

Sound and lamp indications

This table shows the Auto Mower's sound and lamp signal indications. When the mower cover is opened and the alarm has been
switched off, the LEDs on the keypad panel will light for 12 seconds. A green LED indicates an information message and a red LED
an error message. To see the latest error message again, enter
LED Sound
LED 1 flashes
3
2 beeps
1
4
every ten
5 seconds
2
6
LED 2 flashes
3
2 beeps
1
4
every ten
5 seconds
2
6
LED 3 on
3 beeps
3
per second
1
4
5
2
6
LED 3 flashes
3 beeps
3
per second
1
4
5
2
6
LED 4 on
3 beeps
3
per second
1
4
5
2
6
The long beep after the mower cover has been lifted confirms that the cutting disc has stopped rotating.
16
– English
USE
Meaning
Charging in progress. When
complete the Auto Mower
will work again.
Auto Mower has cut for the
set time. It will start to mow
again at the next scheduled
start time.
No code or it has expired.
Enter the code again.
The Auto Mower is trapped
and cannot move.
The cutting disc is blocked.
Switch off the switch and
ensure the cutting disc can
rotate freely.
20 #.
*
LED Sound
LED 4 flashes
3 beeps
3
per second
1
4
5
2
6
LED 5 on
3 beeps
3
per second
1
4
5
2
6
LED 5 flashes
3 beeps
3
per second
1
4
5
2
6
LED 6 on
3 beeps
3
1 per second
4
5
2
6
LED 6 flashes
long beep
3
1
4
5
2
6
Meaning
The Auto Mower is outside of
the cutting area, or one of the
wires is connected incor-
rectly.
The wheel motors are
blocked or slip. Check
whether anything is blocking
the drive wheels.
The Auto Mower cannot find
the charging station.
The Auto Mower cannot
detect the signal from the
loop wire.
Incorrect entry from the
keypad.