Lamp And Sound Indications - Husqvarna Auto Mower Operator's Manual

Sound and lamp indications
This table shows the Auto Mower's sound and lamp signal indications. When the mower cover is opened and the alarm has been
switched off, the LEDs on the keypad panel will light for 12 seconds. A green LED indicates an information message and a red LED
an error message. To see the latest error message again, enter
LED
Sound
LED 1 flashes
3
2 beeps
1
4
every ten
seconds
5
2
6
LED 2 flashes
3
2 beeps
1
4
every ten
seconds
5
2
6
LED 3 on
3 beeps
3
per second
1
4
5
2
6
LED 3 flashes
3 beeps
3
per second
1
4
5
2
6
LED 4 on
3 beeps
3
per second
1
4
5
2
6
The long beep after the mower cover has been lifted confirms that the cutting disc has stopped rotating.
USE
Meaning
Charging in progress. When
complete the Auto Mower
will work again.
Auto Mower has mown for
the set time. It will start to
mow again at the set start
time.
No code or it has expired.
Enter the code again.
The Auto Mower is trapped
and cannot move.
The cutting disc is blocked.
Switch off the switch and
ensure the cutting disc can
rotate freely.
20 #.
*
LED Sound
LED 4 flashes
3 beeps
3
per second
1
4
5
2
6
LED 5 on
3 beeps
3
per second
1
4
5
2
6
LED 5 flashes
3 beeps
3
per second
1
4
5
2
6
LED 6 on
3 beeps
3
per second
1
4
5
2
6
LED 6 flashes
long beep
3
1
4
5
2
6
Meaning
The Auto Mower is outside of
the working area, or one of
the wires is connected
incorrectly.
The wheel motors are
blocked or slip. Check
whether anything is blocking
the drive wheels.
The Auto Mower cannot find
the charging station.
The Auto Mower cannot
detect the signal from the
loop wire.
Incorrect entry from the
keypad.
English –
15