Setting Up An Iscan Vp20 Using The Internal Test Patterns And Avia: Guide To Home Theater Calibration Dvd - DVDO iScan VP20 Owner's Manual

42 HDMI 2
43 HDMI 2
44 HDMI 2
45 HDMI 2
47 HDMI 3
48 HDMI 3
49 HDMI 3
50 HDMI 3
51 HDMI 3
52 HDMI 3
53 HDMI 3
54 HDMI 3
55 HDMI 3
There is a separate set of settings not just for each input but for each format as well. This provides
a lot of flexibility but is complex. For example, you can make settings for an input with an NTSC
source, but when the source is changed to PAL, you must specify new settings.
Each input/format settings contains the information shown in Table 4.
Table 4. Format Settings
Setting
Picture Control
Audio Select
Audio Delay
Overscan
VCR Mode
Deinterlacing
Input AR Preset
User Preset
There is only one set of presets (Preset 1 through Preset 10) for the whole system. However the
user preset is per input and per format.
Setting up an iScan VP20 Using the Internal Test Patterns and Avia:
Guide to Home Theater Calibration DVD
The iscan Vp20 has 3 built-in test patterns to assist in the setup of your display and your individual
sources. ABT recommends that you use the Avia: Guide to Home Theater DVD to assist in this setup.
This dVd can be purchased directly from dVdo at http://www.dvdo.com/companion/avia.php.
1080i (ATSC)
VGa
sVGa
xGa
480i (NTSC)
576i (PAL/SECAM)
480p (NTSC)
576p (PAL/SECAM)
720p (ATSC)
1080i (ATSC)
VGa
sVGa
xGa
brightness
Contrast
saturation
Hue
sharpness
Chroma error Correction
user ar
Hor. Zoom
Vert. Zoom
Hor. Pan
Vert. pan
Hor. Borders
Vert. borders
Description
Audio 1 - 4, Analog, HDMI
preset -0 or user preset
Hor. Zoom
Vert. Zoom
Hor. Pan
Vert. pan
Hor. Borders
Vert. borders
26