Table of Contents
Advertisement
Power Supply Input
The iScan VP20 comes with a 6V@5A AC-to-DC converter power supply, which accepts 100-240 VAC
at 50/60Hz.
To attach power to the unit:
1.
Attach the removable power cord to the external power supply.
2.
Plug the removable power cord into a wall outlet or power conditioner, if applicable.
3.
plug the small connector attached to the cable that comes out of the power supply into the
'DC In' port on the back of the iScan VP20. The iScan VP20 should power on and display
'DVDO iScan VP20 / Powered by ABT' on the FPD for a couple of seconds.
IMPORTANT: Use only the power supply that came with your iScan VP20, or a replacement
procured directly from ABT.
9
Advertisement
Table of Contents
Need help?
Do you have a question about the iScan VP20 and is the answer not in the manual?