s e C T i o n 4 – M e n u o p T i o n s
Input Select
There are nine video inputs on the iScan VP20:
•
VIDEO 1
•
VIDEO 2
•
s-Video
•
s-Video 2
•
COMPONENT 1
•
COMPONENT 2
•
HDMI 1
•
HDMI 2
•
HDMI 3
•
auTo
These inputs can be accessed in five different ways:
•
using the front panel using the Up and Down buttons
•
using the remote control with the direct access buttons
•
using a universal remote programmed with the discrete codes
•
using the osd from the front panel or from the remote to access the input select menu
•
Using RS232 Serial Automation Protocol described in the appendix.
Input Aspect Ratio Control
The input aspect ratio control selects the aspect ratio for the current input signal. The iscan Vp20
automatically converts from the selected input aspect ratio to the selected output aspect ratio.
NOTE: The Zoom and Pan functions are applied to the input signal, not the output. This is an
important consideration, especially for the Pan function. For example: If you do not zoom a full
frame image more than 100%, there is nothing to pan. However, if part of the image is not on the
screen, then the Pan function will work.
Zoom
The Zoom function zooms in on or magnifies the image on your display. The minimum zoom is 100%,
(no zooming); the maximum zoom is 150% (zoom magnification factor of 1.5X). Zoom controls can
be accessed by using the osd or by using the direct access button on the remote control.
On the remote control, push the Zoom button followed by the Up/Down buttons to vertically zoom
the image or the Left/Right buttons to horizontally zoom the image. The amount of horizontal and
vertical adjustment will be displayed on the front panel display.
Using the OSD, select the control that you would like to adjust, Horizontal or Vertical zoom, and
push the Enter button to show the current Zoom setting. Push the Up and Down button to increase
or decrease the zooming factor. Zoom can only increase the size of the image.
5
Video 1 (Composite)
Video 2 (Composite)
s-Video
s-Video 2
Component/RGBs 1
Component/RGBs 2
HDMI 1
HDMI 2
HDMI 3
automatic active input detection and selection
Need help?
Do you have a question about the iScan VP20 and is the answer not in the manual?