Nuvo NV-WCPS Installation And User Manual page 7

Quick Start Guide for initial Wireless Control Pad Setup
5. Once the Zone button selection is made, the Wireless Control Pad will try to
establish communication with the Coordinator. "Searching for Coordinator" will be
displayed.
6. When communication is established, the message "Press SETUP Button on
coordinator...Then Press OK" will appear on the display. Follow the instructions by
pressing the SETUP button on the Coordinator followed by the OK button on the
Wireless Control Pad. When communication is complete, you will see a list of the
available zones in the system appear on the display. Select the ZONE number that you
reserved for the WCP in the configuration.
At this point, your Wireless Control Pad System is fully functional and able to control
any zone in your NuVo System.
4