Nuvo NV-WCPS Installation And User Manual page 27

Basic Source Control
Arrow Forward and Arrow Back: These are typically used for moving forward or
back by track or preset. When listening to the NuVoNet Music Port or M3 Audio
Server as personal music devices, these arrows will move the selection up or
down by track when they are tapped. A press and hold goes into fast forward
or rewind. For use with the NuVoNet Tuners, these buttons tune up and down
through the available frequencies or channels. If a third-party IR controlled
device is selected, these buttons become IR assignable. Two levels of control
can be assigned in the Configurator software. The first function is a single
push and the second is a push and hold. The Wireless Control Pad will display
the name of the associated function.
Arrow Up and Arrow Down: These buttons serve a dual function. When a
source is playing they become volume up and down. When the Menu button is
pushed they move the selection highlight up and down through the selected
menu.
Play/Pause Button: This is used as the standard toggling play/pause function
associated with personal music devices when it is used with the NuVoNet
Music Port, NuVoDocks for iPod or M3 Audio Server. When controlling the
NuVoNet Tuners, this button toggles through the available broadcast bands.
Like the Arrow Forward and Arrow Back buttons, this button is IR assignable
for third-party sources in the Configurator software. It also has a single tap
and press and hold functionality.
Power Button: In normal operation, pressing the Power button turns the
associated zone off. Pressing and holding the Power button turns all the zones
off simultaneously. It is possible to assign IR power commands to the Power
button for third party components through the Configurator software. When
the Wireless Control Pad is powered on, it will display the metadata
associated for the previously selected zone and source. To change zone
control simply press the Zone button and return to the list of available zones.
24