Nuvo NV-WCPS Installation And User Manual page 13

Peripheral Address (Fig. 4)
The Coordinator has a 5 position rotary switch for setting a "Peripheral Device"
address. There are four of these available to each NuVo System. Typically the switch
can be left in its default position (1), but if another Peripheral Device, such as the NV-
NNA NuVoNet Adapter, is being used, each of the devices must have an independent
setting, 1 – 4. The "R" selection is for repeater use, see Section IV. Using the
Coordinator as a Repeater, pg. 16.
Only one Coordinator can be used within an installation and up to five Wireless Control
Pads can be set to communicate with the System's Coordinator.
Figure 4 – Peripheral Address
Peripheral Address
10