Nuvo NV-WCPS Installation And User Manual page 22

Link Status Indicator (Fig. 11)
A useful tool for establishing the best possible Repeater placement is the Link Status
Indicator. This is accessed from the Wireless Control Pad by pressing the Up and Down
arrows simultaneously. Three points of information will appear on the right side of the
display. This information allows you to establish a location of optimal communiction
from the Wireless Control Pad to the Coordinator. Any placement with a strong link will
work well for the Repeater.
Figure 11 – Signal Strength Indicator
Press the Arrow Up
and Down buttons
simultaneously
A C or an R will indicate whether the WCP is communicating with the Coordinator or
Repeater (when a Repeater is present in the system). A ? may appear. This indicates
the Wireless Control Pad has not determined whether it is communicating with the
Coordinator or Repeater. It will change to C or R the next time it switches between a
Coordinator or Repeater.
M3A 3:09 PM
1 of 9
Follow the Day 255
drif -66
Edge of Tomorr
1:28 3:48
MENU ZONE
OK
19
Coordinator or Repeater
communication
C
LQI value
RSSI value