Table of Contents
Advertisement
4.9. Wall mounted type AS***XVERA
Execute proper grounding. Do not connect the earth wire to a gas pipe, water pipe, lightening rod,
or a telephone ground wire. Improper placement of earth wires can result in electric shock.
An electric leakage breaker must be installed, otherwise electric shock or other accidents would occur.
After completion of the installation, the air conditioner shall be electrified to check for electric leakage.
2. Preparation for installation
Installation tools
1
Screw Driver (flat head, wabbler, triangle)
2
Steel Saw
3
60mm Drill
4
Inner Hexagon Spanner
5
Shifting Spanner
6
Spanner
7
Pipe Cutter
3. Accessories for installation
Self-contained accessories
No.
A
Name of
Non-adhesive
Parts
Tape
4. Choose the installation place
Install the indoor unit where the weight of the unit can be supported.
Install the indoor unit where the heat source and steam source are not close and the unit inlet and
outlet are not blocked.
Install the indoor unit where the drainage is easy and the outdoor unit can be easily connected.
Install the indoor unit where its cold air and hot air can be easily sent to all the comers of the room.
Install the indoor unit where the power socket is near and there is sufficient space around the indoor unit.
Install the indoor unit where there is no T.V set, radio set, and wireless applian ce underneath, and the
sunlight lamp is over one meter away.
If the remote controller is installed on the wall, the indoor unit shall be ensured to receive the signal
while the sunlight lamp is on.
PRECAUTION
8
9
10 Clippers
11 Leakage Checker or Soap Liquid
12 Measuring Tape
13 Scraper or File
14 Refrigeration Oil
B
C
Adhesive
Connecting
tape
Hose
-81-
Pipe Expander
Knives
D
E
Heat
Gypsum
insulation
powder
material
F
Drain hose
Hide quick links:
Advertisement
Table of Contents
