Haier AB092XCERA Service Manual page 59

(5). Wiring of indoor unit
The distance between the signal wires and the power cabes should be at least 50mm.
1(L) 2(N)
To other
indoor unit
1.Incorrect address setting will cause abnormal to the system.
2.Communication cable must be use sheilded type.
3.Communication cable and power cable must be use ring terminal type.
P Q A
Communication cable (Shield wire):
H05RN-F 2X (0.75-1.5)mm
Power cable : H05RN-F 3G (1-2.5)mm
WARNING
B C 1(L) 2(N)
2
L N
2
To outdoor unit
-59-
P A B
Q C
To wired controller
(In case of using wired
controller)
C1 C2
(P) (Q)