AS1021TM-T+/1021TM-INF+ User's Manual
2-4
Installing the System into a Rack
This section provides information on installing the 1021TM-T+/1021TM-INF+ into a
rack unit with the rack rails provided. If the system has already been mounted into
a rack, you can skip ahead to Sections 2-5 and 2-6.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. You should also refer to the installation instructions that
came with the rack unit you are using.
Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections: an inner fi xed chassis rail that secures
directly to the server chassis and an outer fi xed rack rail that secures directly to
the rack itself.
Installing the Inner Rails
Both the left and right side inner rails have been pre-attached to the chassis. Pro-
ceed to the next step.
(Inner rail is preinstalled
Figure 2-1. Identifying the Sections of the Rack Rails
Rail Extension
to the chassis)
(right side rail shown)
2-4