AS1021TM-T+/1021TM-INF+ User's Manual
1-2
Serverboard Features
At the heart of the SuperServer 1021TM-T+/1021TM-INF+ lies two H8DMT+/
H8DMT-INF+ dual processor serverboards, which are based on the nVidia MCP55V
Pro chipset. Below are the main features of the H8DMT+/H8DMT-INF+. Note that
the features on each board are doubled for the server.
Processors
Each H8DMT+/H8DMT-INF+ supports dual AMD Opteron™ 2000 Series processors
(Socket F type). Please refer to our web site for a complete listing of supported
processors (www.supermicro.com/aplus).
Memory
The H8DMT+/H8DMT-INF+ has sixteen single/dual channel DIMM slots that can
support up to 64 GB of ECC DDR2-667/533/400 registered ECC SDRAM. All
memory modules used to populate the system should be the same size, type and
speed.
Serial ATA
The MCP55V Pro chipset includes a Serial ATA controller for 3 Gb/s SATA drives.
The hot-swappable SATA drives are connected to a backplane that provides power,
bus termination and confi guration settings. RAID 0 and 1 are supported.
PCI Expansion Slots
Each H8DMT+/H8DMT-INF+ board has one PCI-Express x16 slot, so two PCI-
Express x16 slots are provided in the server. In the 1021TM-T+/1021TM-INF+
server confi guration, riser cards have been pre-installed to support two low-profi le
PCI-Express x16 add-on cards.
Ethernet Ports
An on-chip network controller is integrated into each of the serverboards to support
a total of four Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).
Onboard Controllers/Ports
Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports, two
Gigabit LAN (NIC) ports and (on the 1021TM-INF+ only) an Infi niBand® (MT25204
controller) 20 Gbps port. There are two sets of I/O ports included in the server (one
set for each severboard).
1-2