Chapter 4 System Safety; Electrical Safety Precautions - Supero AS 1021TM-T+ User Manual

4-1

Electrical Safety Precautions

!
Basic electrical safety precautions should be followed to protect yourself from harm
and the SuperServer 1021TM-T+/1021TM-INF+ from damage:
•
Be aware of the locations of the power on/off switch on the chassis as well
as the room's emergency power-off switch, disconnection switch or electrical
outlet. If an electrical accident occurs, you can then quickly remove power from
the system.
•
Do not work alone when working with high voltage components.
•
Power should always be disconnected from the system when removing or install-
ing main system components, such as the serverboard and memory modules.
When disconnecting power, you should fi rst power down the system with the
operating system fi rst and then unplug the power cords of all the power supply
units in the system.
•
When working around exposed electrical circuits, another person who is familiar
with the power-off controls should be nearby to switch off the power if neces-
sary.
•
Use only one hand when working with powered-on electrical equipment. This
is to avoid making a complete circuit, which will cause electrical shock. Use
extreme caution when using metal tools, which can easily damage any electrical
components or circuit boards they come into contact with.
•
Do not use mats designed to decrease static electrical discharge as protection
from electrical shock. Instead, use rubber mats that have been specifi cally
designed as electrical insulators.
•
The power supply power cords must include a grounding plug and must be
plugged into grounded electrical outlets.
Chapter 4
System Safety
4-1
Chapter 4: System Safety