Brother MFC-9440CN User Manual page 57

Turning on the remote codes
You need to turn the Remote Codes setting to
on to use the Fax Receive Code and
Telephone Answer Code.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 4.
Setup Receive
4.Remote Codes
c
Press a or b to choose On.
Press OK.
d
If you don't want to change the Fax
Receive Code, press OK.
e
If you don't want to change the
Telephone Answer Code, press OK.
f
Press Stop/Exit.
Changing the remote codes
The preset fax receive code is l51. The
preset telephone answer code is #51. If you
are always disconnected when accessing
your external TAD, try changing the
three-digit remote codes, for example ###
and 555.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 4.
Setup Receive
4.Remote Codes
c
Press a or b to choose On or Off.
Press OK.
d
If you chose On in c, enter the new Fax
Receive Code.
Press OK.
e
Enter the new Telephone Answer Code.
Press OK.
f
Press Stop/Exit.
Telephone and external devices
7
.
7
.
7
47