Setting The Fax Receive Stamp (Black & White Only); Receiving Faxes Into Memory(Black & White Only); Printing A Fax From The Memory - Brother MFC-9440CN User Manual

Setting the fax receive stamp
(black & white only)
You can set the machine to print the received
date and time in the top center of each
received fax page.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 9.
Setup Receive
9.Fax Rx Stamp
c
Press a or b to choose On (or Off).
Press OK.
d
Press Stop/Exit.
Note
Make sure you have set the current date
and time in the machine.
Receiving faxes into memory
(black & white only)
As soon as the paper tray becomes empty
during fax reception, the screen will display
No Paper, asking you to put paper in the
paper tray. (See Loading paper and
envelopes on page 15.) If you are unable to
put paper in the paper tray the following will
happen:
If Memory Receive is On:
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored into
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.
If Memory Receive is Off:
The machine will carry on receiving the
6
current fax, with the remaining pages being
stored in memory, if enough memory is
available. Further incoming faxes will not be
stored in memory. The machine will then stop
automatically answering calls until fresh
paper is put in the paper tray. To print the last
.
fax you received, put fresh paper in the tray.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 6.
c
Use a or b to choose On or Off.
Press OK.
d
Press Stop/Exit.
Printing a fax from the
memory
If you are using the Fax Storage feature
(Menu, 2, 5, 1), you can still print a fax from
the memory when you are at your machine.
6
See Fax storage on page 54.
a
Press Menu, 2, 5, 3.
Remote Fax Opt
3.Print Document
b
Press Mono Start or Color Start
c
Press Stop/Exit.
6
Receiving a fax
6
.
6
6
43