Setting The Fax Logic; Dial Prefix - Brother MFC-9440CN User Manual

Setting the fax logic

You can change the transmission process
when you send or receive the fax manually
with an external telephone.
Easy mode:
Call Out
Documents in
Send the faxes
the ADF by pressing
Start
No documents Send the faxes
in the ADF or by pressing
Documents on Start
the scanner
glass
Advanced mode:
Call Out
Documents in
Send the faxes
the ADF by pressing
Start
No documents Press Start,
in the ADF or and then you
Documents on can select:
the scanner
1. Send
glass
2. Receive
a
Press Menu, 2, 0, 2.
Miscellaneous
2.Fax Mode
b
Press a or b to select Advanced Mode
or Easy Mode.
Press OK.
c
Press Stop/Exit.

Dial Prefix

3
The dial prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Receives Call
a
Send the faxes
by pressing
b
Start
Receive the
faxes by
pressing Start
c
Receives Call
Send the faxes
d
by pressing
Start
Press Start,
and then you
can select:
1. Send
• You can use the numbers 0 to 9, #, l and
2. Receive
• If the pulse dialing mode is on, # and l are
e
Press Menu, 0, 6.
Press a or b to choose On or Off.
Press OK.
If you chose On, go to c.
If you chose Off, go to e.
Press 1 or 2 to choose 1.Change or
2.Exit.
If you chose 1.Change, go to d.
If you chose 2.Exit, go to e.
Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
!. (Press Hook to display "!".)
You cannot use ! with any other numbers
or characters.
not available to use.
Press Stop/Exit.
General setup
3
3
25