Brother MFC-9440CN User Manual page 120

Examples of poor print
quality
Ghost
The color of your printouts are
not what you expected.
All one color
110
Recommendation
Make sure that you use paper that meets our specifications. Rough-
surfaced paper or thick paper may cause the problem. (See
Acceptable paper and other media on page 9.)
Make sure that you choose the correct media type in the printer driver
'
or in the machine s Paper Type menu setting. (See Acceptable paper
and other media on page 9 and Basic tab in the Software User's
Guide on the CD-ROM.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit on page 160.)
Make sure that the toner cartridges are installed properly. (See
Replacing a toner cartridge on page 155.)
Make sure that the toner cartridges are not empty. (See Toner life end
message on page 155.)
Make sure that the drum unit is installed properly. (See Replacing the
drum unit on page 160.)
Make sure that the belt unit is installed properly. (See Replacing the
belt unit on page 167.)
Perform the calibration by using the control panel. Press Menu, 4, 5.
a
Press OK to select Calibrate.
b
Press 1 to select Yes.
(For more information, See Software User's Guide on the CD-ROM.)
Adjust the color by using the custom setting in the printer driver.
Colors the machine can print and colors you see on a monitor are
different. The machine may not be able to reproduce the colors on
your monitor.
Make sure that you use paper that meets our specifications. (See
Acceptable paper and other media on page 9.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit on page 160.)
Put in a new belt unit. (See Replacing the belt unit on page 167.)
Clean the corona wires and the drum unit for the color causing the
problem. (See Cleaning the corona wires on page 142 and Cleaning
the drum unit on page 145.) If the print quality has not improved, put
in a new drum unit. (See Replacing the drum unit on page 160.)
The drum unit may be damaged. Put in a new drum unit. (See
Replacing the drum unit on page 160.)