Memory Board; So-Dimm Types - Brother MFC-9440CN User Manual

e
®
For Windows users:
Go to Start > Control Panel > Printers
and Faxes. Right-click on your printer
icon and choose Properties. Choose
the Accessories tab and click Auto
Detect. When the optional lower tray
and paper size have been detected click
Apply.
Note
The Auto Detect function is not available
under the following machine conditions:
• The machine's power switch is off.
• The machine is in an error state.
• The machine is in a network shared
environment.
• The cable is not connected to the
machine correctly.
If this situation occurs, you can manually
add the options you have installed. In
Available Options select the option you
have installed, click Add, and then click
Apply.
®
For Macintosh users:
The printer driver is already configured for
use with the lower paper tray. No additional
steps are required.
98

Memory board

This machine has 64 MB of standard memory
and one slot for optional memory expansion.
You can expand the memory up to 576 MB by
installing 144 pin small outline dual in-line
memory modules (SO-DIMMs). When you
add the optional memory, it increases the
performance for both copy and print
operations.

SO-DIMM types

You can install the following SO-DIMM:
Buffalo SO-DIMM
Capacity Buffalo part number
128 MB VN133-D128/MF
VN133-D128/SD
256 MB VN133-D256/MB
VN133-D256/SD
512 MB VN133-D512/SCD
Tech Works SO-DIMM
Capacity Buffalo part number
128 MB 12462-0001
256 MB 12485-0001
512 MB 12475-0001
Note
For more information, visit the Buffalo
Technology site
at http://www.buffalo-technology.com.
In general, the SO-DIMM must have the
following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm
Dram Type: SDRAM 2 Bank
B
B