Memory Board - Brother MFC-9440CN User Manual

Hide thumbs Also See for MFC-9440CN:
Table of Contents

Advertisement

e
®
For Windows
users:
Go to Start > Control Panel > Printers
and Faxes. Right-click on your printer
icon and choose Properties. Choose
the Accessories tab and click Auto
Detect. When the optional lower tray
and paper size have been detected click
Apply.
Note
The Auto Detect function is not available
under the following machine conditions:
• The machine's power switch is off.
• The machine is in an error state.
• The machine is in a network shared
environment.
• The cable is not connected to the
machine correctly.
If this situation occurs, you can manually
add the options you have installed. In
Available Options select the option you
have installed, click Add, and then click
Apply.
®
For Macintosh
users:
The printer driver is already configured for
use with the lower paper tray. No additional
steps are required.

Memory board

This machine has 64 MB of standard memory
and one slot for optional memory expansion.
You can expand the memory up to 576 MB by
installing 144 pin small outline dual in-line
memory modules (SO-DIMMs). When you
add the optional memory, it increases the
performance for both copy and print
operations.
In general, the machine uses
industry-standard SO-DIMM with the
following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm
Dram Type: SDRAM 2 Bank
For purchasing information and part numbers
visit the Buffalo Technology website:
http://www.buffalo-technology.com/
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from.
Options
B
B
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-9450cdn

Table of Contents