Location Of The Ferrite Core - Brother HL-5240 Service Manual

APPENDIX 7

LOCATION OF THE FERRITE CORE

It is necessary to place the ferrite core correctly in order to comply with the EMI (Electromagnetic interface)
standard when assembling. Refer to the following chart as well to know the necessary ferrite core
depending on models.
RELAY-FRONT HARNESS AL
FERRITE CORE:16X9X5X0.5
HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
LD HARNESS AL
FERRITE CORE:16X9X5X0.5
1
3
2
4
Main Motor FFC
FERRITE CORE:26.0X9.5X5.0X1.2
A-15
Polygon Motor FFC
CORE:23.8X15X6.3X
1.1
Confidential