Brother HL-5240 Service Manual page 176

CHAPTER 4 TROUBLESHOOTING
Windows
(1) Locate the "Windows" key on your keyboard. These are the keys with the Windows
(2) Press the "Windows" key plus the "E" key to open My Computer.
(3) On the left, right click My Network Places, click Properties, then right click Local
(4) Click the Advanced tab. Under Internet Connection Firewall, verify that the box
(5) Once your firewall is disabled, try reinstalling the Brother software package. For
(6) If the installation completed successfully, the Firewall on your computer is rejecting
NOTE:
After the Brother software package is installed, enable again your Firewall. For instructions on
how to re-enable your Firewall software, refer to your User's Guide or contact the Firewall
software manufacturer.
®
XP SP1 users
logo on it.
Area Connection and click Properties.
next to Protect my computer... is unchecked. If the box is selected, click the box to
remove the check. Then, click OK.
instructions on how to install from the CD-ROM, use the Quick Setup Guide we have
provided with the machine.
the necessary network connection. In this case, you will need to disable the Firewall
whenever you install the network drivers.
on your computer
4-62 Confidential