Brother HL-5240 Service Manual page 298

CHAPTER 7 SERVICE SUPPORT SOFTWARE
NOTE:
* Some margin of error must be taken into consideration because coverage for the
printable area of A4-size paper is calculated using video signals
* If the firmware version is 1.02 or before, the maintenance information gives out false
information on the remaining life of Drum. To know the accurate information of Drum,
print the Print Settings or upgrade the firmware version.
(9) Print Settings
If you want to know the drum unit life or the number of printed pages, you should print out
the Print Settings.
1.
NOTE:
• The descriptions printed in Print Settings vary depending on the countries.
• It is also allowed you to print the print settings by pressing the Go button three times
• Select Information, then Print Settings by pressing the Set button three times.
• <Replace count>
PF KITMP:
PF KIT 1:
PF KIT 2:
PF KIT 3:
FUSER:
LASER:
DRUM:
TONER:
• <Total Pages Printed>
Previously Used Toner:
Current Toner:
• <Developing Bias>
Contents overview
The "Print Settings" is configured with two pages for HL-5240 and more than three
pages for HL-5250DN/5270DN/5280DW.
All pages have following terms in common:
* Title
* Model name
* Serial number
The setting indication is the same as the panel setting information, supporting 17
languages.
(ENG / FRE / GER / DUT / ITA / SPA / NOR / FIN / DAN / POR / SWE / CZE / POL /
HUN / RUS / BUL / RUM)
The descriptions on the third page or later are indicated in English only.
continuously when the front cover is closed and when the printer is in the ready
mode.
(HL-5270DN/5280DW)
7-10 Confidential