Error message
Dust On Drum
Print Overrun
Service Call Error
•
Refer to
3.2 "Cleaning the Corona Wire" in Chapter 3.
•
Press the Go button to print the data left in the printer. Cancel
the print job if you want to delete the data remaining in the
printer.
•
If this does not clear the error, reduce the complexity of your
document or reduce the print resolution.
•
Set page protection to AUTO by using the supplied Windows
driver or Remote Printer Console program.
•
Change the following settings in the supplied Windows
and try again. The best combination of these settings will vary
depending on your document:
•
Graphics Mode
•
TrueType mode
•
Use Printer TrueType
•
Check the LED indication or the LCD message to identify the
error. Refer to
2.2 "Service Calls" in this Chapter.
4-13
HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
Remedy
®
Fonts
®
®
driver
Confidential