Roller Holder Assy - Brother HL-5240 Service Manual

CHAPTER 5 DISASSEMBLY AND RE-ASSEMBLY
8.12

Roller Holder ASSY

(1) Push the Lift arm to the direction of the arrow 1a and pull out the pin of the Roller holder
ASSY. Then, turn the Roller holder ASSY to the direction of the arrow 1b.
(2) Slide the Roller holder ASSY to the direction of the arrow 2a. Then, lift up the gear side
of the Roller holder ASSY to the direction of the arrow 2b and pull it out to the direction of
the arrow 2c to remove.
Assembling Note:
When assembling the roller holder ASSY, align the section "A" on the shaft of the roller
holder ASSY with the hole on the paper feed frame.
Pin
Lift arm
1b
1a
Fig. 5-153
Roller holder ASSY
2c
2b
Fig. 5-154
5-92
Roller holder ASSY
LT paper feed frame
"A"
Paper feed frame
2a
Confidential