Brother HL-5240 Service Manual page 305

< Function Table >
Title & Subtitle
TRAY SETTING
MANUAL FEED
RESET SETTINGS
SAVE SETTINGS
SAVE FONT
PRIMARY FONT
SECONDARY FONT
DOWNLOAD FONT
SAVE MACRO
(When a macro is
registered if the LaserJet
emulation is selected.)
TRAYCOMMAND MODE
READOUT SELECT
Item to be Set
PAPER IN=CONT*
PAPER IN=STOP
RESET SETTING1
SAVE SETTING1
SET ID=####
SET ID=####
DOWNLOAD=####
SET ID=####
TRAY COM.=NORM.*
TRAY COM.=SPEC.
READOUT=ON
READOUT=OFF*
7-17
HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
Description
Feeds paper automatically when
printing using the manual feed
function.
Feeds paper by pressing the Go
button when printing using the
manual feed function.
Selects the "User setting 1" as the
current printer setting.
Saves the current printer setting as
the "User setting 1".
Saves the current primary fonts in
LaserJet Emulation into the storage
devices (ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
Saves the current secondary fonts in
LaserJet emulation into the storage
devices (ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
Saves the downloaded fonts in
LaserJet emulation into the storage
devices (ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
Saves the macro in LaserJet
emulation into the storage devices
(ROM Disk).
After fixing the first three digits with
the Set button, set the last two digits.
HP LaserJet 4 compatible.
HP LaserJet 3 compatible.
When receiving DC3 in FX
emulation, ignores the data received
before DC1.
Not ignore the data even DC3 is
received.
Confidential