Epson LQ-300 User Manual page 39

Font button
Press the Font button during normal operation to cycle
through the printer fonts listed on the control panel. When you
press the button, the Font lights change to indicate your
current selection. For more about choosing a font, see page 2-4.
If you hold down the Font button while you turn on the
printer, you enter the Printer Setting mode, where you can
change many of the printer's settings. For more about printer
settings, see page 2-22.
LF/FF button
During normal operation, you can press this button briefly to
feed paper line by line. Hold it down to load a single sheet, or
to advance continuous paper to the next top-of-form position.
You can also press LF/FF to eject a page.
If you want to make sure the printer is working correctly, you
can also use this button to run the self test. To start the self test,
hold down the LF/FF button while you turn on the printer. For
complete instructions, see page 1-10.
Pause button
Press the Pause button to stop the printer temporarily during
printing or the self test. Press it again to resume activity.
Paper Park
Press the Font and LF/FF buttons together to feed continuous
paper backward to the paper-park position. See " Printing in
the push tractor position" on page 2-8.
Micro Adjust
While in this mode, you can adjust the loading position by
pressing the LF/FF button or the Font button. See "Adjusting
the loading position" on page 2-5.
Using the Printer
2-3