Epson LQ-300 User Manual page 64

7. When you reach the setting that you want to change, press
the Pause button once. The printer beeps twice and enters
a submenu table for that setting. For example, if you choose
Interface and then press Pause, you enter Table H.
8. See the appropriate table in your printed help text. Press
the Font button to move through the settings in the table.
The printer beeps twice each time you press the Font
button while in a submenu table.
9. When the control panel lights match your desired setting,
press the Pause button to make your selection. The printer
saves the new setting and returns to Table B.
10. Repeat steps 6 through 9 for each additional setting you
want to change, or skip to step 11 to exit the Printer Setting
mode.
11. When you are finished, turn the printer off. Any settings
you have made remain in effect until you change them
again.
2-28
Using the Printer