5. Insert the paper into the paper slot as shown below and
pull it up. Position the paper using the scale on the printer
as a guide. The printer prints to the right of the position
marked 0.
Note:
Make sure your paper supply is positioned within 1 meter
(3 feet) of the printer.
6. Slide the left sprocket unit so that its sprockets match the
position of the holes in the paper and lock the unit in place.
Then slide the right sprocket unit to match the width of
your paper, but do not lock it. Move the paper support
midway between the two sprocket units.
Using the Printer
2-15