Table of Contents
Advertisement
Accepting a Call While Telephoning
You are telephoning, e.g. on trunk key 1
ing tone and see the call on the display. The LED next to your
available trunk key, e.g.
1. Press the trunk key where the caller is waiting. Your first call is
placed on hold. You talk with the caller.
2. You can also toggle back and forth between callers or initiate a
conference with both callers (please refer to page 23 also).
3. Press the goodbye key
press the trunk key where the other caller is waiting. You are
now connected with the caller on hold once again.
Note: If you have switched on call waiting protection (please
refer to page 31 also) no other calls will be signalled (no call-wait-
ing tone, no LED of an available trunk key blinking). Callers now
receive the busy signal.
Holding a Call
You can briefly interrupt an ongoing call:
1. Press the hold key
calling now hears music on hold.
2. Press the Hold key
to continue the call.
Taking a Call from Another Terminal
(Take)
You can take an ongoing call from another terminal on your
Forum IPhone 545SIP telephone and continue it there. To be able
to do so, your telephone and the other terminal have to have the
same internal call number. To do so, the administrator of the
Forum 500 / Forum 5000 communications system has to config-
ure a Take function key (please refer to Programming Function
Keys starting on page 49).
To take on a call on your telephone you:
pick up the handset and press the Take function key or
, is blinking.
to terminate the current call. Then
or the
again or press the
Operating Forum IPhone 545 SIP Telephone
, hear the call-wait-
softkey. The person
Hold
Hold
Telephoning
17
softkey
Advertisement
Table of Contents
