Table of Contents
Advertisement
16
Telephoning
Speed Dialling
The administrator of the Forum 500 / Forum 5000 communica-
tions system can configure function keys for you with speed dial-
ling destinations (Destination function key, see Programming
Function Keys starting on page 49).
Pick up the handset and press the function key where the
speed dialling destination is programmed.
alternatively – when you wish to call in the handsfree mode:
Press the function key – with the handset down – where the
speed dialling destination is programmed.
Answering a Call
An incoming call is signalled via ringer, a blinking trunk key and
the blinking red LED indicator to the upper right. The display
shows a picture (photo) of the person you are speaking with if an
image has been saved on the Forum 500 / Forum 5000 communi-
cations system (please refer to page 54).
To accept the call, you:
pick up the handset or
press the
press the blinking trunk key
press the handsfree key
handsfree mode (see page 24).
During call signalling you can:
press the
calling continues to hear the ringing tone.
press the
calling now hears the busy tone.
Operating Forum IPhone 545 SIP Telephone
softkey or
Answer
softkey to mute the ringer. The person
Silence
softkey to reject the call. The person
Reject
/
/
to accept the following call in the
or
Advertisement
Table of Contents
