Intermec UBI EasyCoder 601 E User Manual page 11

UBI EasyCoder 601 E – User's Manual
PAPER LOAD – CUT OFF, cont'd.
11
Return the locking handle to closed position.
13
Thread the paper through the cutter between the two
guide plates.
15
Turn on the power using the switch on the rear plate.
12
1.
Release the slack absorber (1). Adjust the green guide
ring so the paper is guided with a minimum of play (2).
14
Close the cutter unit while pulling at the end of the paper.
Close the right-hand door.
16
Feed out and cut two blank copies by pressing the
<Print> key twice.
2.
11