Intermec UBI EasyCoder 601 E User Manual page 10

UBI EasyCoder 601 E – User's Manual
PAPER LOAD – CUT OFF, cont'd.
6b 7
In case of paper roll with a 76.2 mm (3 inches) core, first
fit the two adapters on the paper supply spool.
This diagram shows the path of the paper web.
8
Rotate the label slack absorber 180˚ clockwise to open position (snap-lock). Then thread the paper underneath the
slack absorber and under the guide plate of the label stop sensor.
9 10
Push the paper inwards as far as it will go. Turn the printhead lift knob to "Print" position.
10