For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Disassembly
Remove oil tank
filler cap. Dispose of oil prop-
erly and flush
ut
oil tank with solvent. Remove
O
I
debris from tank using low pressure air.
Remove clutch cover, chain, bar and clutch
assembly. Remove three screws from oil pump.
Thread two M5 screws into pump housing as
shown. Tighten screws alternately half a turn
each time until pump housing comes loose.
Remove pump housing and M5 screws.
Note:
Removal of the oiler also removes
dust cover washer on the crankshaft.
Lift oil suction hose and filter from oil tank and
clean or replace oil pick-up filter.
Chain Lubrication System
the
www.mymowerparts.com