Husqvarna 42 Workshop Manual page 19

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
If no spark appears, install new spark plug or
test plug P/N 50271 13-01 and pull starter
handle.
If no spark appears, remove ON/OFF switch
lead from stop switch and pull starter handle,
spark appears, stop switch is faulty and musl
be replaced. If no spark appears, check high
tension leads, connections and contacts for
dirt, wear and/or damage.
Using air gap gauge P/N 5025134-02 check
air gap between flywheel magnet and ignition
module. Air gap should be 0.3 mm (.012").
If
www.mymowerparts.com
IgnitionSvstem
5
17