Checking The Crankshaft - Husqvarna 42 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Mount the tool on the left crankcase half and
press out the crankshaft.
Remove the crankshaft bearings from the
crankcase halves by heating up the crankcase
around the crankshaft bearing then pressing
the bearing out of the case.

Checking the Crankshaft

The crankshaft is not serviceable and must be
exchanged if defective. Some crankshafts may
have a slight blue discoloration around the
crank pin. This is a normal condition caused by
the heat treatment around the crank pin hole
during assembly.
Crankcase and Crankshaft
www.mymowerparts.com
12
49