Lubrication System, Oil Pump - Husqvarna 50 Workshop Manual

8
Disassembly
Pour out the oil and clean the oil tank. Check the oil tank
ventilation by slightly pressurizing the tank through the
filler opening with compressed air. The oil tank vent is
located at the top and to the front of the bar pad. Air
should readily pass through the vent. Remove the clutch
assembly as instructed in section
Remove the oil pump cover pIate retaining screw and
withdraw the cover plate.
Remove the oil pump assembly from the crankcase.
Using a screwdriver, carefully remove the oil suction tube
and filter. Clean the oil pick-up filter.
Pump
Centrifugal Clutch.
7,