Table of Contents
Advertisement
32
11
TROUBLESHOOTING
Problem
No dialling tone
when pressing key
When connect to
a PBX, no and/or
wrong connection
after dialling.
„SEARCHING"
is displayed.
The call does not work. Service not activated or
No display.
12
GUARANTEE AND SERVICE
The phone is guaranteed for 24 months from the date of purchase
shown on your sales receipt. This guarantee does not cover any faults
or defects caused by accidents, misuse, fair wear and tear, neglect,
faults on the telephone line, lightning, tampering with the equipment,
or any attempt at adjustment or repair other than through approved
agents.
Please keep your sales (till) receipt this is your proof of guarantee.
Causes
The connection cord
of the base station
is not plugged in.
The adapter cord is not
plugged in correctly
in the base station.
Another handset
is using the base
to make a call.
Wrong telephone
line cord
Dialling prefix is needed.
Base station out
of range.
Base station not
connected to mains.
wrong setting.
Empty battery.
Solutions
Check the connections.
Unplug and plug back
in the mains. Check
that the telephone cord
has been plugged into
the base station and
the phone socket.
Check the base station
plug and the 230V plug
(remove and plug-in).
Wait until the line
is unoccupied.
Use the original
telephone line
cord supplied
Insert the dialling prefix.
Reduce the range.
Connect base
station to mains.
Check your Subscription
with network or change
the dial mode.
Recharge battery.
Advertisement
Table of Contents
