Table of Contents
Advertisement
36
11
TROUBLESHOOTING
Problem
No dialing tone when
pressing key
When
connect
PBX, no and/or wrong
connection after dialing.
"WAITING" is displayed.
The call does not work.
No display.
Please contact the technical support of the telephone service provider for
further information.
This telephone is not equipped with a grounding function! Therefore,
some of the functions may be limited when used in PBX systems.
Cause
The connection cord of
the base station is not
plugged in.
The adapter cord is not
plugged in correctly in
the base station.
The line is busy, as
another
used.
Wrong
cord.
to
a
Dialing prefix is needed.
Hand
set loses the link
with base.
Base
ed to mains.
connect
Service not activated or
wrong operator or wrong
setting.
Empty battery.
Solutions
handset
is
connection
Insert the dialing prefix.
station
not
Check your Subscription
with network or change
the dial mode.
Recharge battery.
Check the connections.
Unplug and plug back
in the mains.
Check
that
the
telephone
line cord has been
plugged into the base
station and the phone
socket.
Check the base station
plug and the 220V plug
(remove and plug-in).
Wait until the line is
unoccupied.
Use
the
original
connection cord.
Reduce the range.
Connect
base
station to mains.
Advertisement
Table of Contents
